Lýsing
Ledson Sarox9+ in ivory white color has four strong LEDs as position lights and lets you choose between xenon white or yellow-orange, just like the rest of our extra lights in the „+series“.
Sarox’s contemporary design is a combination of stylish and progressive, while the interior of the auxiliary light impresses with quality components that make all the difference when you go out and drive in the dark.
How about: 1 lux brightness at 469 meters and 10200 actual lumens, a solid protection against harsh climates out on our Nordic roads with IP69K rating, E-markings (ECE R112/R10/R7), membrane for automatic pressure equalization, electronic heat management for optimal LED performance and lifetime, heatsink in aluminum, Ledson bracket in stainless steel…
Sarox 9+ has a combined light pattern (combo)
A combined light image is a mix between high beam (distance) and flood light (width). The auxiliary light has diodes that reflect light both straight ahead and to the sides. This light pattern is ideal if you want a lot of light close to the vehicle for the smaller roads but still have the length to illuminate the road far ahead.
Characteristics:
- With position lights, yellow-orange or xenon white (switch on the color you want)
- Combo beam light image (a mix between spot and flood)
- E-marked ECE R112 (Ref. 45), R10 / R7 (white position light) – Read more about E-marks here
- Range: 938 m (0.25 lux), 469 m (1 lux)
- EMC protected (do not interfere with the radio)
- 12000 lumens (theoretical), 10200 lumens (actual)
- Cool white light (5700K)
- TIR (Total Inner Reflection) makes use of all light and minimizes stray light
- ETM (Electronic Thermal Management) – adjusts the strength of the diodes depending on how hot they are for optimal lifespan
- Side reflective optical system
- Pressure equalization membrane
- Aluminum cooling flange
- Adjustable bracket in stainless steel
- Lexan polycarbonate
- Polycarbonate lens
- Delivered in pieces
- 36 month warranty
Technical data:
- 120W (4 x 20W Cree LED + 4 x 10W Cree LED)
- IP69K (water/dustproof) – Read more about IP rating here
- DT connector 4 pin included
- Voltage 9-36 V
- Load high beam: 8.1A @ 12V and 4.4A @ 24V
- Position light load: 0.9A
Dimensions & weight:
- Width: 218 mm
- Height: 218 mm (233 mm including bracket)
- Depth: 84 mm
- Cable length: 42 cm
- Weight: 1.8 kg
Included:
- A Ledson Sarox9+ LED auxiliary light 9″
- Bracket, bolts and screws to attach the auxiliary light with either one or two attachment points
- DT connector (4-pin)
- Installation instructions
- DT adapter
Installation instructions for cables (detailed installation instructions included):
- Red: Extra light (+)
- Black: Additional light / Position light (- earth)
- White: Position light (+) white light
- Yellow: Position light (+) yellow-orange light
