Lýsing
-
The Ledson Sarox7+ is the little brother of the Sarox9+ at 7 inches, which is well suited for the slightly smaller vehicle or if you want extra light that simply doesn’t take up as much space in the front. This slightly smaller additional light also has four strong LEDs as position lights and lets you choose between xenon white or yellow-orange, just like the Sarox9+ and the rest of our additional lights in the „+series“.
Sarox’s contemporary design is a combination of stylish and progressive, while the interior of the auxiliary light impresses with quality components that make all the difference when you go out and drive in the dark.
How about: 1 lux brightness at 406 meters and 4800 actual lumens, a solid protection against harsh climates out on our Nordic roads with IP69K rating, E-marks (ECE R112/R10/R7), membrane for automatic pressure equalization, electronic heat management for optimal LED performance and lifetime, heatsink in aluminum, Ledson bracket in stainless steel…
Sarox 7+ has a combined light pattern (combo)
A combined light image is a mix between high beam (distance) and flood light (width). The auxiliary light has diodes that reflect light both straight ahead and to the sides. This light pattern is ideal if you want a lot of light close to the vehicle for the smaller roads but still have the length to illuminate the road far ahead.
Installation of Sarox7+ on the vehicle
- Can be mounted smoothly and neatly with the help of a license plate holder or pipe bracket. See our various accessories for mounting options.
- We strongly recommend using our DT relay with original connection to connect the LED auxiliary light to the vehicle. You then have the option to choose between controlling the auxiliary light with a button or connecting it to the high beam (the auxiliary light then turns on and off automatically together with when the high beam turns on and off, which most people prefer). There is then also a fuse between the auxiliary light and the battery to prevent possible damage to the battery and other equipment. Detailed installation instructions are included with the DT relay.
Characteristics:
- LED additional light of 7″ in diameter
- With position lights, yellow-orange or xenon white (switch on the color you want)
- Combo beam light image (a mix between spot and flood)
- E-marked ECE R112 (Ref. 37.5), R10 / R7 (white position light) – Read more about E-markings here
- Range: 812 m (0.25 lux), 406 m (1 lux)
- EMC protected (do not interfere with the radio)
- 6000 lumens (theoretical), 4800 lumens (actual)
- Cool white light (5700K)
- TIR (Total Inner Reflection) makes use of all light and minimizes stray light
- ETM (Electronic Thermal Management) – adjusts the strength of the diodes depending on how hot they are for optimal lifespan
- Side reflective optical system
- Pressure equalization membrane
- Aluminum cooling flange
- Adjustable bracket in stainless steel
- Lexan polycarbonate
- Polycarbonate lens
- 36 month warranty
Technical data:
- 60W (4 x 10W LED + 4 x 5W LED)
- IP69K (water/dustproof) – Read more about IP rating here
- DT connector 4 pin included
- Voltage 9-36 V
- Load high beam: 4A @ 12V and 2A @ 24V
Dimensions & weight:
- Width/Diameter: 180mm (approx. 7″)
- Height: 180 mm (192 mm including bracket)
- Depth: 68 mm
- Cable length: 42 cm
- Weight: 1.15 kg
Included:
- Ledson Sarox7+ LED additional light 7″
- Bracket, bolts and screws to attach the auxiliary light with either one or two attachment points
- DT connector (4-pin) complete with DT relay harness
- DT adapter (2 pole to 4 pole)
- Installation instructions
Installation instructions for cables (detailed installation instructions included):
- Red: Extra light (+)
- Black: Additional light / Position light (- ground)
- White: Position light (+) white light
- Yellow: Position light (+) yellow-orange light
NOTE: The DT connector must not be cut as this means an increased risk of moisture damage and the warranty then ceases to apply.
