Lýsing
Blade – the LED bar that blends in and becomes part of the car. With a height of only 25 mm, it is almost invisible in daylight – but when you turn on the high beam you get a strong and wide light image with a range of 435 meters at 1 lux. Perfect for everything from everyday commuting to weekend adventures. Ledson Blade is E-marked according to ECE R149 and can therefore be used on public roads.
You can see the complete assembly and installation here (Youtube video)
Stylish during the day – safe at night
Thanks to the specially designed brackets, the ramp is easily mounted behind the license plate. When it is off, it blends into the lines of the vehicle, making it perfect for those who want a powerful yet discreet lighting solution.
Hassle-free installation – everything is included
For easy and smooth installation, a complete cable set is included for direct connection to the vehicle’s battery, adapted for both LED, Xenon and halogen vehicles. The cable and its connector are extra thin and are easily pulled through a discreet hole through the engine compartment. With a 170 cm long cable, you have plenty of room for installation. You can very easily adjust the light pattern using two screws on the outer edges of the ramp when it is mounted. It doesn’t get any simpler than this!
The ramp can be attached both above and below the license plate and with recessed or protruding mounting.
Halogen or XBB to LED/Xenon high beam
For vehicles with halogen on the high beam, simply connect the yellow cable to the high beam signal, and for vehicles with Xenon or LED, use the XBB Kit (XBB Dongle OBD II Kit with part no. 7800221, sold separately) for smooth connection. Blade works with both 12V (car) and 24V (truck), but only 12V with XBB installation. If you are unsure whether you need the XBB Dongle kit, i.e. if you have halogen or LED/Xenon on your high beam, contact us at info@diodhuset.se or 042 453 33 30.
Installing Blade is simple and quick ( detailed instructions can be found here )
Features and technical data:
- Driving Beam light pattern (wide and oblong)
- Curved design to neatly match the front of the car
- E-marked R149 (ref. no. 40), R10 (EMC-rated)
- Range: 435 m (1 lux)
- Lumens: 8,800 lumens (theoretical), 6,500 lumens (actual)
- Color temperature 5000K (Neutral white)
- 88W (22 x 4W LEDs)
- Voltage: 9-36V
- IP69K (water/dustproof)
- Aluminum housing and polycarbonate lens
- Side-reflecting optics
- Pressure equalization diaphragm
- Electronic heat management
Included:
- Blade LED ramp
- Control unit with connection wiring
- Ramp brackets
- Locking strip for license plate
- Allen screws with washers
- Self-drilling screws
- Assembly instructions ( Downloadable version here )
Dimensions & weight (excl. brackets):
- Width: 520mm
- Height: 25mm
- Depth: 25mm
- Weight: 850 g (incl. wiring and complete mounting kit)
