Lýsing
Treat yourself to the best. Epix+ stands out from the crowd with a proprietary, sporty design, developed with today’s modern cars in mind. Approved R65 flash light ensures your visibility and the world-unique position light is fully integrated into the reflector.
The dynamic lighting of the position light also gives the ramp an effective start. Everything you need and want in an LED ramp, you will find at Epix+. We have maximized the performance in E-approved mode, with the possibility of Powerboost when you want to go „off road“. Approved R65 flash light ensures your visibility when working on the road and keeps you safe in all weathers and times of the day. Self-developed smart mounts ensure mounting pretty much wherever and however you want on the vehicle.
Epix+ is for you who want the experience of the future
The design of the ramp is uniquely developed by Ledson and is in harmony with today’s most modern cars, taking your vehicle to the next level. Its dynamic position light lights up with a powerful movement that guides the light neatly from one side of the ramp to the next before fully lighting up. The position light is integrated into the reflector, a completely unique feature that makes you stand out a little extra.
Powerboost: how much light do you want?
As if that wasn’t enough to look forward to, you also have the option of Powerboost. Simply tighten or loosen a screw on the ramp to switch between E-approved mode or ‘off road’ Powerboost mode, for those times when you need maximum brightness on the road ahead.
Driving Beam light image (Drive)
Driving Beam’s reflectors are all computer generated and manufactured to give a similar light image as the combo. It mimics and enhances the car’s existing headlights and lights.
Characteristics and technical data:
- R65 approved flash light with 10 different flash patterns
- Position light with unique dynamic ignition, integrated in the reflector
- Selectable position light in xenon white or yellow/orange
- Driving Beam light pattern (wide and oblong)
- E-marked R112, R7, R10 (EMC rated)
- Range: 458 m (1 lux), Powerboost: 530 m (1 lux)
- 15,500 lumens (theoretical), 11,800 lumens (actual)
- Color temperature 5000K (xenon white)
- 180 W (12 x 15 W LEDs)
- Voltage: 9-36V
- IP69K (water/dustproof)
- Aluminum housing and polycarbonate lens
- Side reflective optics
- Pressure equalization membrane
- Electronic heat management
- DT connector (supplied)
Included:
- Epix20+ Strobe 20″ LED ramp with Powerboost
- Bolts and screws to attach the ramp to the appropriate surface
- Mounting details for gable mounting
- Mounting details for rear mounting, standing/hanging
Dimensions & weight (excl. brackets):
- Width: 510 mm
- Height: 43 mm
- Depth: 61 mm
- Weight: 1.86 kg
Flash Light Pattern:
- Single flash sync: 2.2HZ
- Single flash asynchronous: 2.2HZ
- Triple flash synchronized: 1.1HZ
- Triple flash asynchronous: 1.1HZ
- Quadruple Flash Synchronized: 1.25HZ
- Quadruple flash asynchronous: 1.25HZ
- Combination between one long and five short synchronized: 0.83HZ
- Combination between one long and five short asynchronous: 0.83HZ
- Flash burst synchronized: 10HZ
- Lightning series asynchronous: 10HZ
NOTE: The DT connector must not be cut as this means an increased risk of moisture damage and the warranty then ceases to apply.
