Lýsing
Characteristics and technical data:
- Flash light with five different flash light patterns (one R65 approved)
- Selectable position light with dynamic lighting (yellow-orange or xenon white, plug in the color you want)
- Range E-approved mode: 359 m (1 lux)
- Range Powerboost mode: 647 m (1 lux)
- Driving beam light image (enhances the vehicle’s regular high beam image)
- E-marked ECE R112 (Ref. 30), R7 (white position light)
- EMC-protected ECE R10 (do not interfere with the radio)
- 11500 lumens (theoretical), 8200 lumens (actual)
- Neutral white light (5000K)
- ETM (Electronic Thermal Management) – adjusts the strength of the diodes depending on how hot they are for optimal life
- Side reflective optical system
- Pressure equalization membrane
- Aluminum cooling flange
- Adjustable bracket in stainless steel
- Polycarbonate lens
- 36 month warranty
Technical data:
- 150W (10 x 15W Cree LED), flash light 20W (4 x 5W LED)
- IP69K (water/dustproof)
- Cable with 6-pin DT connector
- Voltage 9-36 V
- Load E-approved mode: 2.2A @ 12V and 1.1A @ 24V (high beam only, without position light)
- Load high beam Powerboost mode: 10.6A @ 12V and 4.8A @ 24V (high beam only, without position light)
Dimensions & weight:
- Width: 247 mm
- Height: 145 mm (incl. bracket)
- Depth: 86 mm
- Weight: 1.6 kg
Included:
- One Ledson Epix10+ Strobe LED auxiliary light 10″
- Bracket, bolts and screws to attach the auxiliary light with either one or two attachment points
- DT connector (6-pin)
- Installation instructions
Installation instructions for cables (detailed installation instructions included):
- Red: Extra light (+)
- Black: Additional light / Position light (- earth)
- White: Position light (+) white light
- Yellow: Position light (+) yellow-orange light
- Green: Flash light (+)
- Blue: Sync & Pattern (+)
- Brown: Alternating (+)
NOTE: The DT connector must not be cut as this means an increased risk of moisture damage and the warranty then ceases to apply.
