Lýsing
LEDSON Pollux9+ Generation 3: More powerful and smarter than ever
With Pollux9+ Generation 3 you improve your driving experience with the latest technology from Ledson in an additional light that is packed with functions. With an impressive 120W power and the ground-breaking function pulse-controlled Powerboost, this third generation of Pollux9+ has increased flexibility and improved brightness when needed most.
Pollux9+ Generation 3 provides outstanding brightness and range to ensure superior visibility and safety in all driving conditions. With its rugged design, the Pollux9+ Generation 3 is built to withstand tough conditions and is ready to deliver superior performance for a long time to come.
Pulse-controlled Powerboost – It doesn’t get smoother
Pollux9+ Gen3 comes equipped with Ledson Powerboost – an extra power mode for those moments when you need (or just want) maximum brightness. A simple maneuver with the high beam lever activates this impressive brightness, so that you can easily adjust the amount of light of the auxiliary light as needed. With the new generation Powerboost from Ledson, you can change the mode very easily with the light horn (flashing with the high beam lever) NOTE: your auxiliary light is delivered in E-approved mode, follow the instructions to activate Powerboost mode.
Toggle Powerboost mode with “ 10+10+5″
This is done most easily with the ‘light horn’ when the light switch is in the off or parking light position
- Turn on the auxiliary light for about 10 seconds (between 7-13 seconds)
- Flash the auxiliary light in rapid succession 10 times (within 10 seconds)
- The eleventh time you should have the auxiliary light on and after about 5 seconds the Powerboost function will automatically switch on or off
TIR reflectors
TIR stands for Total Inner Reflection and means that all light is effectively reflected and directed before it is sent out from the reflector. The stray light (the light that is not directed but that disappears „unfocused“ out of the lighting without doing any real use) is minimized. A traditional reflector directs and focuses most of the light but far from all, the Pollux 9+ has these TIR reflectors for maximum light.
Choose your light pattern: Driving or Spot Beam
Choose between Driving Beam for a balanced light image that complements your vehicle’s headlights, or Spot Beam for a powerful and focused light beam that illuminates the road in front of you efficiently.
Mounting on the vehicle
- Can be mounted smoothly and neatly with the help of a license plate holder or pipe bracket.
- We strongly recommend using our Ledson Connect with original connection to connect the LED auxiliary light to the vehicle. You then have the option to choose between controlling the auxiliary light with a button or to connect it to the high beam (the auxiliary light then turns on and off automatically when the high beam turns on and off, which most people prefer). There is then also a fuse between the auxiliary light and the battery to prevent possible damage to the battery and other equipment.
Properties:
- E-marked (ref. 37.5 for Driving Beam, ref. 50 for Spot Beam), ECE R112 / R10 / R7 (white position light)
- Equipped with pulse-controlled power boost
- EMC protected (do not interfere with the radio)
- With position lights (4 LEDs) yellow-orange or xenon white (switch on the color you want)
- „Driving beam“ light image (33491236) or „Spot Beam“ light image (33491237) – choose version
- Range Driving Beam: 407 m (1 lux), Powerboost: 659 m (1 lux)
- Range Spot Beam: 493 m (1 lux), Powerboost: 805 m (1 lux)
- 4200 lumens (theoretical), 3500 lumens (actual)
- Powerboost 13000 lumens (theoretical), 10500 lumens (actual)
- Color temperature 5000K (Neutral white)
- TIR optical system (Total Inner Reflection)
- Pressure equalization membrane
- 36 month warranty
Technical data:
- 120W (12 x 10W LEDs)
- Nominal power 92.4 W
- IP68 & IP69K (water/dustproof)
- DT connector (4-pin) included
- Electronic heat management
- Voltage 9-36 V
- Load 3.2 A @ 12 V and 1.6 A @ 24 V
- Load Powerboost 9.8 A @ 12 V and 4.6 A @ 24 V
Dimensions & weight:
- Width: 218 mm
- Height: 234.5 mm (incl. bracket)
- Depth: 68.5 mm
- Weight: 1.9 kg
- Cable length: 650 mm
Included:
- Ledson Pollux9+ Generation 3 LED additional light
- Bolts and screws to attach the auxiliary light with either one or two attachment points
- DT connector (4-pin)
- Installation instructions
Installation instructions for cables (detailed installation instructions are included with the product):
- Red: Extra light (+)
- Black: Additional light / Position light (- earth)
- White: Position light (+) white light
- Yellow: Position light (+) yellow-orange light
NOTE: The DT connector must not be cut as this means an increased risk of moisture damage and the warranty then ceases to apply.
