Lýsing
Own-developed Swedish design
Epix10+ Strobe in elegant white (ivory white) from Ledson is an innovative series of additional lights that elevate your vehicle to the next level, it is also equipped with 5 different flash patterns, one of which is R65-approved. With a Swedish design language (in-house developed by Ledson) and outstanding performance, these additional lights give your vehicle a particularly unique and exclusive appearance that is guaranteed to attract attention! Experience outstanding brightness and design in a perfect balance.
Flash light pattern
Single flash (ECE R65 approved), double flash, triple flash, quadruple flash, continuous hyper flash.
Synchronizable and with alternating flash patterns
Epix10+ Strobe can be synchronized with each other, which means that all additional lights use the same flash pattern and flash in time/synchronized. Alternate flash patterns are possible, which means that your auxiliary lights can be divided into two different groups so that they flash opposite to each other (eg right / left or top / bottom). All flash patterns can be used alternately, which means that you get 10 different flash patterns with this function. It is possible to synchronize and use alternating flash patterns with an infinite number of additional lights, i.e. there are no restrictions on the number.
Dynamic position light
Epix10+ Strobe lights the position light dynamically with an effective movement that leads the light nicely from one side of the auxiliary light to the other before it lights up completely. This effect gives you and your vehicle a distinct and unique character
Pulse-controlled Powerboost – It doesn’t get smoother
Epix10+ Strobe comes equipped with Ledson Powerboost – an extra power mode for those moments when you need (or just want) maximum brightness. A simple maneuver with the high beam lever activates this impressive brightness, so that you can easily adjust the amount of light of the auxiliary light as needed. With the new generation Powerboost from Ledson, you can change the mode very easily with the light horn (flashing with the high beam lever) through a few simple steps that you can see here. NOTE: your auxiliary light is delivered in E-approved mode, follow the instructions to activate Powerboost mode.
Characteristics and technical data:
- Ivory white design that matches, among other things, Scania’s white shade
- Flash light with five different flash light patterns (one R65 approved)
- Selectable position light with dynamic lighting (yellow-orange or xenon white, plug in the color you want)
- Range E-approved mode: 359 m (1 lux)
- Range Powerboost mode: 647 m (1 lux)
- Driving beam light image (enhances the vehicle’s regular high beam image)
- E-marked ECE R112 (Ref. 30), R7 (white position light)
- EMC-protected ECE R10 (do not interfere with the radio)
- 11500 lumens (theoretical), 8200 lumens (actual)
- Neutral white light (5000K)
- ETM (Electronic Thermal Management) – adjusts the strength of the diodes depending on how hot they are for optimal life
- Side reflective optical system
- Pressure equalization membrane
- Aluminum cooling flange
- Adjustable bracket in stainless steel
- Polycarbonate lens
- 36 month warranty
Technical data:
- 150W (10 x 15W Cree LED), flash light 20W (4 x 5W LED)
- IP69K (water/dustproof)
- Cable with 6-pin DT connector
- Voltage 9-36 V
- Load E-approved mode: 2.2A @ 12V and 1.1A @ 24V (high beam only, without position light)
- Load high beam Powerboost mode: 10.6A @ 12V and 4.8A @ 24V (high beam only, without position light)
Dimensions & weight:
- Width: 247 mm
- Height: 145 mm (incl. bracket)
- Depth: 86 mm
- Weight: 1.6 kg
Included:
- One Ledson Epix10+ Strobe white LED auxiliary light 10″
- Bracket, bolts and screws to attach the auxiliary light with either one or two attachment points
- DT connector (6-pin)
- Installation instructions
Installation instructions for cables (detailed installation instructions included):
- Red: Extra light (+)
- Black: Additional light / Position light (- earth)
- White: Position light (+) white light
- Yellow: Position light (+) yellow-orange light
- Green: Flash light (+)
- Blue: Sync & Pattern (+)
- Brown: Alternating (+)
NOTE: The DT connector must not be cut as this means an increased risk of moisture damage and the warranty then ceases to apply.
